How Deep Is A Base Cabinet?

Standard base cabinet depth is 24 inches (61cm). Deeper cabinets are also available and are useful because refrigerators have been getting deeper – up to 36 inches deep (92cm) so a deeper countertop is appropriate.

What Depth Do Base Cabinets Come In?

24 inches

How Tall Is A Base Cabinet?

Standard Base Cabinet Sizes Height: Typically, standard base cabinets measure 34 1/2″ H and 36″ H from the floor to the top of the countertop when a countertop is installed. The toe kick portion of the cabinet is 4 1/2″ H, the standard door height is 24″ H, and the top drawer height is 6″ H (equaling 34 1/2″ H total).

How Deep Is A Toe Kick On A Cabinet?

3 inches

Are All Kitchen Cabinets The Same Depth?

Most commonly, wall cabinets are 12 inches deep, since this provides a good compromise between storage space in the cabinets and workable countertop space below the cabinet. Above microwave ovens, a 15- to 18-inch deep cabinet is common, and above a refrigerator, a 24-inch deep cabinet is standard.

What Size Sink Goes In A 33 Inch Base Cabinet?

Most base cabinets are 36 to 42 inches high and 25-1/4 to 26 inches wide. A typical 33-by-22-inch sink will fill a 36-inch base cabinet.

Do They Make 18 Inch Base Cabinets?

Typical Kitchen Cabinet Dimensions Base cabinets – typically 24″ deep (also 12″, 15″, 18″) and 34 1/2″ tall (countertops add 1 1/2″ to make the finished height 36″).

What Is Cabinet Depth?

The distance between the front of your kitchen countertops and your back wall or backsplash is your “counter depth.” It’s usually somewhere in the 24–25-inch range. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range.

How Do You Measure A Sink For A Cabinet?

To measure your sink base cabinet: Empty the cabinet completely for maximum accuracy and ease of measurement (sink base cabinets should not have drawers or shelves at all to accommodate plumbing). First, measure the total depth of your cabinet, including the frame. Next, measure the total outer width of your cabinet.

How Wide Can A Cabinet Door Be?

It depends on the overall design and appearance of the cabinets but I generally do not like building doors wider than 23″ unless they are full height pantry doors, in which case I might go as wide as 25″.

Should Toe Kick Match Cabinets?

To avoid standing out, most toe kicks are painted either black the same color as the cabinets. They are there to serve a practical purpose, after all.

How Deep Is A Bathroom Vanity?

The standard vanity depth is 21 inches. But you can gain floor space in a small bath by trimming at least part of the vanity to 18, 15, or even 12 inches deep.

What Is The Standard Toe Kick Height And Depth?

The average toe kick height measures 3.5-inches and the average, as well as ideal, toe kick depth measures 3-inches.

Why Do Cabinets Have A Toe Kick?

What is a Toe Kick? A toe kick is a notch-shaped recess at the bottom front of a base cabinet. It provides a recess for your feet so you can get slightly closes to the countertop. This improves your balance,and also reduces the fatigue that would result if you were forced to reach across a countertop to work.