Make a Floating Wood Mantel Step 1: Measure Fireplace Width. Step 3: Measure, Mark and Miter Top. Step 4: Measure, Mark and Miter Sides. Step 5: Attach Fascia, Sides and Top. Step 6: Cut and Attach Reinforcement Blocks. Step 7: Spackle and Sand. Step 8: Stain and Seal. Step 10: Secure Mantel to Mounting Blocks.
How Do You Make A Modern Mantel?
Make a Floating Wood Mantel
Step 1: Measure Fireplace Width. Step 3: Measure, Mark and Miter Top. Step 4: Measure, Mark and Miter Sides. Step 5: Attach Fascia, Sides and Top. Step 6: Cut and Attach Reinforcement Blocks. Step 7: Spackle and Sand. Step 8: Stain and Seal. Step 10: Secure Mantel to Mounting Blocks.
How Thick Should A Mantle Be?
Assuming you mean solid wood and not flakeboard made from recycled material, you can assume a MINIMUM of 1–1/2″ of thickness for every 2 feet of length provided you are using 1 corbel for each 4 feet of length (2 corbels for 4 feet, 3 corbels for 8 feet, etc).
How Do You Build A Fireplace Mantel And Surround?
The fireplace surround is finished with pine face trim along with cove and crown molding for some added detail.
Build the pillars for the fireplace surround out of MDF. Trim out the DIY fireplace surround pillars. Build the DIY fireplace surround box beam header. Prepare the wood for the fireplace mantel.
How Far Should A Mantle Stick Out?
A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that. Do not guess when sizing the mantel to a room, or the mantel could wind up being too long or too short.
What Is The Average Depth Of A Fireplace Mantel?
The typical depth of our mantels is anywhere between 10-12”. However, if you are looking for something a bit narrower, we can make it happen. Mantel Height: We recommend installing the mantel 4.5′ from the floor.
How High Should A Mantle Be Above The Fireplace?
Most codes specify mantel distance from the firebox itself. As a general rule, a mantel is placed about 12 inches above the fireplace opening. Add an inch to the distance for every inch that the mantel protrudes. So, a mantel 6 inches deep would be attached 18 inches above the firebox opening.
What Is The Best Wood To Make A Fireplace Mantel?
Fireplace Mantel Wood Options When looking for durability, consider a very dense wood like Cherry, Walnut, Mahogany, or Reclaimed Antique Heart Pine. When looking for affordability, consider woods like Poplar, Maple, or Oak.
What Materials Can Be Used For A Fireplace Surround?
Fireplace Design Idea – 6 Different Materials To Use For A Fireplace Surround STEEL. One of the most popular fireplace surround materials. WOOD. A less obvious choice for a fireplace surround, considering what you burn, is wood. CONCRETE. STONE. BRICK. TILE.
How Do You Make A Fireplace Look Modern?
Learning to DIY: How to Update a Fireplace on a Budget Add a touch of paint. Gone are the days of design elements such as bold and bright red fireplaces and natural, oak-colored wall paneling and trim. Turn your brick to stone. Add a mantel. Think — and build — outside the box. Accessorize, accessorize, accessorize.
How Do You Install A Wood Mantel On A Brick Fireplace?
How to Install a Mantel Remove the old mantel. Add support by drilling holes for lag shields, then install lag bolts into the brick. Measure carefully and drill corresponding holes for the wood mantel. Push the wooden mantel carefully into place using wood glue for extra support.
How Do I Build A Fireplace Surround?
Steps: Build Two Rectangular Boxes. To build the side columns for the new surround, use MDF to construct two rectangular boxes with open backs. Centering the Newel Post on the Box. Seal Gaps with Painter’s Caulk. Fasten Cleats for a Fireplace Mantel and Surround. New Fireplace Surround and Mantel.