VIDEO
How Do You Remove Wires From A Plastic Connector?
How to Remove Wires From Plastic Connectors
Inspect the plastic connector for a locking mechanism. Grip the wire with your thumb and forefinger where the wire goes into the connector. Place a pair of wire cutters next to the connector and cut the wire to remove it from the connector.
How Do I Disconnect A Molex Connector?
To unplug them, just rock the connector laterally side to side – gently, and only a little – while applying a lot of pulling force. Get your fingers right into the corner of those flanges on either side – that’s what they’re there for.
How Many Pins Are In A Molex Connector?
Since Molex makes dozens of different connectors, there is no single connector technically called a “Molex connector.” However, the term “Molex connector” has become a generic way to describe the Molex 4-pin 8981 power connector used to power hard drives, optical drives, and other storage devices.
How Do You Clean Car Electrical Connections?
Brush the metal pins with the toothbrush. Apply a quick spray of the electrical contact cleaner to remove any dry dust or corrosion. Use vinegar to clean the pins if contact cleaner is not available. Brush the pins again to remove any left over debris.
How Do You Use A Wire Connector?
How to Use Electrical Wire Connectors Step 1 – Turn Off the Power. Step 2 – Choose the Right Size Wire Connector. Step 3 – Strip the Wires that are Being Connected. Step 4 – Place the Two Stripped Ends Together. Step 5 – Place the Connector Over the Ends of the Wires. Step 6 – Twist the Connector On.