What Is System Memory Multiplier?

RAM Speed = Base Clock Rate * Memory Multiplier. If you remember from the last guide, the base clock rate (BCLK) is used to determine the speed of many other components in the system, including the memory and CPU. So, to overclock your ram, we’ll just need to increase BCLK or the memory multiplier.

What Is Memory Multiplier Tweaker?

Memory Multiplier Tweaker. Provides different levels of memory auto-tuning. ( Default: Auto) Channel Interleaving. Enables or disables memory channel interleaving.

What Should My Dram Voltage Be?

You can try the Dram voltage up to 1.50v which is still in the purple, anywhere from 1.15v to 1.25v for the vccio and cpu system agent voltages should be enough.

Is Overclocking Ram Worth It?

RAM overclocking usually isn’t worth it. However, in select scenarios, like with an AMD APU, it certainly is. Even in those cases, though, due to the complexity of the overclocking process, you may just want to buy better RAM to begin with.

What Is Cpu Flex Ratio Override?

CPU flex ratio is the minimum multiplier setting it’ll go to. So the override is to set it to what you want. Quote from Hardops. “I found the CPU flex ratio override setting. This was set to 20x which is basically the minimum non-turbo ratio the CPU will use under certain circumstances.”

What Is Uncore Ratio?

uncore or ring bus or cache ratio (lots of names for it I know) is the cache speed on the CPU. ONLY overclock the uncore once you get solid stability on your CPU overclock. Then overclock the cache to, if possible, the same speed as your core clock.

What Is Memory Enhancement Settings?

Your motherboard does offer a mode called “Memory Enhancement Settings”, try changing it to Enhanced performance. Memory Enhancement Settings. Provides several memory performance enhancement settings: Normal (basic performance), Relax OC, Enhanced Stability, and Enhanced Performance. ( Default: Normal)

Should You Enable Xmp?

If you don’t enable XMP, they will run at your system’s standard specifications that are dependent on the CPU you have. However, XMP allows your system to set motherboard and CPU parameters correctly, to allow higher frequency RAM modules, that are designed to run beyond usual specifications.

Is Xmp Safe?

XMP is safe to use. The memories are made from factory to run at 3200 mhz,they were designed for this. Enabling XMP doesnt affect your pc in a bad way. An XMP preset is an overclock setting for your memory.

How Do I Test My Memory Speed?

Just open up the Control Panel and click on System and Security. There should be a subheading called View amount of RAM and processor speed’. When you click on this option, it will show you information such as memory size, OS type, and processor model and speed.

How Do I Check My Ram Frequency?

To check what your RAM frequency currently is, Download CPU-Z, it’s freeware that gathers information on some of the main devices of your system. Find the RAM you bought and note the frequency. CPU-Z displays the DRAM frequency so doubling it gives you the double data rate.

Does Ram Speed Matter?

Your RAM’s speed does not alter how fast your CPU goes, even when overclocked or hyper-threaded, but it can slow the CPU down depending on if your RAM is full or not. RAM speed comes down to how much data is transferred at a given time, and much of that can be determined by the number of your RAM module.

Can Overclocking Ram Damage It?

RAM doesn’t really perform too much better at cooler temperatures, but serious overclocking still heats up the memory chips. If you are already using a CPU liquid-cooled loop, putting in a water block for the RAM is relatively easy if that’s the route you want to go.

Can I Change Dram Frequency?

Just change the DRAM Frequency option in the BIOS to DDR3-1600. The DRAM Frequency field in CPU-Z–> Memory tab should read 800 MHz if it’s set correctly. You can also verify the current timings under the same tab. Just change the DRAM Frequency option in the BIOS to DDR3-1600.

Does Overclocking Ram Reduce Lifespan?

When overclocking anything there is always a possibility that it will shorten that item’s life span but if you do it correctly you will be fine.

What Is Nb Frequency?

The NB Frequency, where NB historically stands for ‘North Bridge’, is the frequency that the Infinity Fabric is running at. In this case above, we get it running at 1663 MHz. For a given frequency of the memory, say 1000 MHz, the system will perform 1000 million full clock cycles every second.

Categories FAQ