What Type Of Oil Does A 2009 Toyota Corolla Use?

Oil Specifications The 2009 Corolla requires 4.5 quarts of 100 percent synthetic 0W-20 motor oil for maximum performance. It requires 5W-20 OE for normal performance. The oil filter typically needs to be replaced every 25,000 miles. The oil drain plug is torqued to between 27 and 29 ft-lbs.

What Kind Of Oil Do You Put In A Toyota Corolla?

To ensure that your Corolla is running smoothly, we recommend that you use Toyota Genuine Motor Oil with a grade of ILSAC GF-5, and a viscosity of SAE 0W-20. This oil is guaranteed to perform between temperatures of -20 degrees and 100 degrees Fahrenheit.

What Type Of Oil Does A 2010 Toyota Corolla Use?

Toyota recommends using Toyota Genuine Motor Oil SAE 5W-20 or 0W-20 for the 2010 Corolla. Both Toyota Genuine oils are synthesis oils. Toyota notes that SAE 0W-20 is best for good fuel economy and cold starting the engine in winter.

What Type Of Oil Does A 2008 Toyota Corolla Take?

The 2008 Toyota Corolla uses full synthetic motor oil, SAE 5W-30.

What Does Toyota Recommend For Oil?

Genuine Toyota motor oil 0W-20 utilizes a Toyota-specific additive package that will provide the best results for oil performance and fuel economy. However, other 0W-20 synthetic oils can be used as long as they are ILSAC certified, which is found on the oil container label.

Does Toyota Corolla Need Synthetic Oil?

Only Toyota vehicles in which 0w-20 synthetic oil is required (except for the 2TR-FE & 3UR-FBE Engines*) have been approved for extended oil change intervals of 10,000-miles/12-months. That will help your engine get the full benefit of synthetic oil.)

How Often Does A Toyota Corolla Need An Oil Change?

Toyota says to change the oil 6 months/5,000 miles unless it is 0W-20 synthetic oil. Then, it is 1 year/10,000 miles.

What Is Sae 0W20?

Honda and Toyota, among other auto manufacturers, often recommend 0W-20 low viscosity oils for their vehicles. These manufacturers have selected this low viscosity, full synthetic formulation to optimize fuel economy. Mobil™ 0W-20 motor oils can also be used where 5W-20 is recommended.

What Oil Should I Use In My Car?

A 5W oil is typically what’s recommended for winter use. However, synthetic oils can be formulated to flow even more easily when cold, so they are able to pass tests that meet the 0W rating.

How Much Oil Do I Put In My 2008 Toyota Corolla?

The 2008 Toyota Corolla oil capacity is 4.2 liters (4.4 US Quarts). When you drive for about 7200 km (4500 miles) after the engine oil replacement, the Engine Oil Replacement Reminder Light illuminates for 3 seconds and then flashes for 12 seconds with the ignition key turned to the “ON” position.

How Much Oil Does A 2007 Corolla?

Oil Change The 2007 Toyota Corolla requires 4.5 quarts of motor oil. Under all temperature conditions, 5W-30 weight oil is required.

What Oil Does A 2005 Toyota Corolla Use?

Toyota Corolla 2005, SAE 5W-30 Full Synthetic Motor Oil, 1 Quart by Idemitsu®.

Where Is The Oil Filter Located On A 2009 Toyota Corolla?

2009 Toyota Corolla Oil Filter Location. The oil filter cartridge is located on passenger (right) side of the engine next to the pan. It is a cartridge stlye, Toyota part #04152-YZZA6. You will need to remove the sump cover and replace the O-ring.

How Do You Change The Oil Filter On A 2010 Toyota Corolla?

Oil & Filter Change Toyota Corolla (2009-2013) Getting Started. Open the Hood. Find Oil Drain. Locate the oil drain plug underneath the vehicle. Drain Oil. Set up the workspace, drain oil and replace plug. Find Oil Filter. Locate the oil filter. Remove Filter. Position drain pan and remove the oil filter. Replace Filter. Remove Oil Cap.

How Do You Change The Oil On A 2011 Toyota Corolla?

How to Change the Oil on Your Toyota Corolla Prepare tools. – Get together all your supplies and tools. Let the car sit. Put a pan under the drain plug. Drain the old oil. Take out the oil filter. Install the new oil filter. Pour new oil in. Check the oil level.